# Alveolar Gas Equation (PAO₂ Calculator)

Calculate PAO₂ = FiO₂ × (P_atm − 47) − PaCO₂ / RQ. Defaults: P_atm 760 mmHg (sea level), RQ 0.8. Gives a directional hint vs expected ~100 mmHg. For full A-a gradient interpretation use a-a-gradient-calculator. Derived from StatPearls, LITFL, Cornell PICU, and West. Not medical advice.

> Canonical page: https://test.elysiatools.com/en/tools/alveolar-gas-equation

- **Category:** Health

- **Keywords:** alveolar gas equation, pao2, alveolar oxygen, fio2, respiratory quotient, altitude, oxygenation, blood gas, abg, pulmonology, critical care

## Overview

The Alveolar Gas Equation Calculator estimates alveolar oxygen pressure (PAO₂) from PaCO₂, FiO₂, atmospheric pressure, and respiratory quotient using PAO₂ = FiO₂ × (P_atm − 47) − PaCO₂ / RQ. It uses sea-level pressure and an RQ of 0.8 by default and provides a directional comparison with expected PAO₂ values.

## Inputs

- **PaCO₂ (mmHg)** (number): Arterial partial pressure of CO₂ (mmHg) from ABG.
- **FiO₂ (inspired oxygen fraction)** (number): Inspired oxygen fraction (0.21 = room air). Range 0.15–1.0.
- **Atmospheric Pressure (mmHg, optional)** (number): Atmospheric pressure (mmHg). Default 760 at sea level. Lower at altitude (e.g. Denver ~630).
- **Respiratory Quotient (RQ, optional)** (number): Respiratory quotient. Default 0.8 (mixed diet); 1.0 pure carbohydrate; ~0.7 high fat/protein.
- **Decimal Places** (number)

## When to use

- Estimate PAO₂ from arterial PaCO₂ and inspired oxygen values.
- Adjust the calculation for altitude by entering a different atmospheric pressure.
- Check how calculated PAO₂ compares with the expected value on room air at sea level.

## How it works

- Enter PaCO₂ in mmHg and FiO₂ as a fraction, such as 0.21 for room air.
- Optionally replace the default atmospheric pressure of 760 mmHg and RQ of 0.8.
- The calculator applies PAO₂ = FiO₂ × (P_atm − 47) − PaCO₂ / RQ.
- The JSON result reports PAO₂, inputs, calculation method, and a directional category.

## Use cases

- Review arterial blood gas inputs by estimating the expected alveolar oxygen pressure.
- Compare room-air PAO₂ at sea level with PAO₂ at reduced atmospheric pressure at altitude.
- Explore how FiO₂, PaCO₂, atmospheric pressure, and RQ affect the calculated PAO₂.

## Frequently asked questions

### What does this calculator measure?

It estimates alveolar oxygen partial pressure, or PAO₂, in mmHg.

### What FiO₂ should I enter for room air?

Enter 0.21 for room air.

### What are the default atmospheric pressure and RQ?

The defaults are 760 mmHg for sea level and 0.8 for a mixed diet.

### Can I calculate PAO₂ at altitude?

Yes. Enter the local atmospheric pressure in mmHg instead of using the sea-level default.

### Does this replace a complete A-a gradient interpretation?

No. This tool focuses on PAO₂ and does not provide a full A-a gradient interpretation. It is not medical advice.

## Related tools

- [A-a Gradient (Alveolar-Arterial O₂)](https://test.elysiatools.com/en/tools/a-a-gradient-calculator): Calculate the alveolar-arterial O₂ gradient to distinguish hypoxemia causes. PAO₂ = FiO₂×(P_atm−47) − PaCO₂/0.8; A-a = PAO₂ − PaO₂. Normal ≈ (Age+10)/4. Elevated → V/Q mismatch, shunt, diffusion impairment. Derived from StatPearls, LITFL, Cornell PICU, and Martin 1999. Not medical advice.
- [Alveolar Ventilation Calculator (VA)](https://test.elysiatools.com/en/tools/alveolar-ventilation-calculator): Calculate VA = (VT − VD) × RR in L/min. VD may be supplied or estimated as ~2 mL/kg body weight. Normal resting ~4–6 L/min; low → hypercapnia, high → hypocapnia. Derived from West, LITFL, StatPearls, and Radford 1955. Not medical advice.
- [Apgar Score (Newborn 1 & 5 min)](https://test.elysiatools.com/en/tools/apgar-score): Calculate the Apgar score to assess newborn condition at 1 minute and 5 minutes after birth. Five signs are each scored 0–2 at both time points: Appearance (skin color), Pulse (heart rate), Grimace (reflex irritability), Activity (muscle tone), and Respiration. Each time point totals 0–10. Interpretation: 7–10 reassuring; 4–6 moderately abnormal (may need assistance); 0–3 critically low (immediate resuscitation). The tool reports both the 1-min and 5-min scores, the change (delta), and per-time-point interpretation. A 5-min score, and especially the change from 1 to 5 min, indicates response to resuscitation; persistent low 5-min scores warrant continued resuscitation and reassessment at 10 min. Derived from Apgar 1953, reaffirmed by ACOG/AAP. The Apgar is a physiologic snapshot at a moment in time and is not, by itself, a marker of asphyxia or long-term neurologic outcome. Not medical advice.
- [OD600 to CFU/mL Converter (Calibration Curve Slope)](https://test.elysiatools.com/en/tools/bacterial-growth-od): Convert OD600 to CFU/mL via a calibration slope with organism presets, blank correction, dilution handling, and linearity warnings.
- [Henderson-Hasselbalch Equation (pH / HCO₃⁻ / PCO₂)](https://test.elysiatools.com/en/tools/bicarbonate-ph-conversion): Solve any one of pH/HCO₃⁻/PaCO₂ from the other two via pH = 6.1 + log10(HCO₃⁻/(0.03×PaCO₂)). Reports linear Henderson \[H⁺\] cross-check. Derived from Henderson 1908, Hasselbalch 1916, Siggaard-Andersen 1974, LITFL, StatPearls, Berend 2016. Not medical advice.
- [Bilirubin Unit Converter (mg/dL ↔ µmol/L)](https://test.elysiatools.com/en/tools/bilirubin-unit-converter): Convert serum bilirubin (total/direct/indirect) between mg/dL and µmol/L. Factor 17.1 (molar mass 584.67 g/mol). Derived from Young 1987, StatPearls, AAP 2004, Bhutani. Not medical advice.
- [Body Adiposity Index Calculator](https://test.elysiatools.com/en/tools/body-adiposity-calculator): Calculate Body Adiposity Index (BAI) - estimates body fat percentage from hip circumference and height
- [Calcium Unit Converter (mg/dL ↔ mmol/L)](https://test.elysiatools.com/en/tools/calcium-unit-converter): Convert total serum calcium between mg/dL and mmol/L. Factor 0.25 (atomic weight 40.078; × 4.0 inverse). Does not albumin-correct. Derived from Payne 1973, Young 1987, StatPearls, Endocrine Society. Not medical advice.

## Samples

- [Web Image Processing Python Samples](https://test.elysiatools.com/en/samples/web-image-processing-python): Web Python image processing examples using PIL/Pillow including reading, saving, resizing, and format conversion
- [Android Image Processing Java Samples](https://test.elysiatools.com/en/samples/android-image-processing-java): Android Java image processing examples including reading/saving images, scaling, and format conversion
- [Android Image Processing Kotlin Samples](https://test.elysiatools.com/en/samples/android-image-processing-kotlin): Android Kotlin image processing examples including reading/saving images, scaling, and format conversion
- [Web Image Processing Rust Samples](https://test.elysiatools.com/en/samples/web-image-processing-rust): Web Rust image processing examples including image read/save, scaling, and format conversion

## Related content

- [Critical Care Blood Gas, Oxygenation, and Hemodynamics Workflow](https://test.elysiatools.com/en/hubs/critical-care-blood-gas-oxygenation-hemodynamics): Connect ABG acid-base interpretation with oxygenation, cardiac output, and vascular resistance calculations for structured clinical checking.
