# Album Loudness Matcher

Match a batch of tracks to one target loudness the way album gain works: one gain for the whole record keeps intentional inter-track dynamics, hybrid mode only tames outliers, per-track mode flattens everything.

> Canonical page: https://test.elysiatools.com/en/tools/audio-album-loudness-matcher

- **Category:** Media

- **Keywords:** album loudness, album gain, replaygain, loudness matching, lufs normalization, ebu r128, batch normalize, inter-track dynamics, true peak, playlist loudness, album mastering

## Overview

Upload the tracks (files or one ZIP, up to 20). Every track is measured with the EBU R128 chain (integrated LUFS, true peak), and the album loudness is summed with the R128 segment formula — the same energy-weighted math ReplayGain album gain uses, so a 40-second interlude does not get crushed to match a 5-minute anthem. Album mode then applies ONE gain (target − album loudness) to every track: the quiet ballad stays quieter than the loud single, exactly as mastered, which is how loudness normalization on streaming platforms treats an album anyway. Hybrid mode keeps every inter-track difference inside a tolerance band you set (default 2 LU) and only pulls outliers back toward the band — quiet intro and loud finale survive, the one misdelivered -8 LUFS demo gets tamed. Per-track mode normalizes each file to the same loudness for playlists and sync libraries. True-peak safety is always on: if the planned gain would push a track past your dBTP ceiling (default -1), album mode lowers the whole album’s gain to keep the record coherent, while the other modes trim that track or — with the limiter switch — run a true-peak limiter stage instead (attack 5 ms, release 50 ms, level disabled). Renders are lossless (WAV/FLAC), every output is re-measured so the report shows measured-after values, and everything lands in a ZIP with a per-track CSV gain sheet.

## Inputs

- **Track files or ZIP** (file)
- **Target** (select)
- **Matching mode** (select)
- **Hybrid tolerance (LU)** (number)
- **Custom target (LUFS)** (number)
- **True-peak ceiling (dBTP)** (number)
- **Limit instead of gain-trim** (checkbox): When a track would exceed the true-peak ceiling, insert a limiter stage instead of trimming its gain (album mode always trims the whole album).
- **Output Format** (select)

## When to use

- Mastering an album or EP for streaming platforms while preserving the volume contrast between quiet interludes and loud main tracks.
- Balancing audio compilations or episodic podcast segments where occasional outlier tracks must be tamed without flattening the entire dynamic range.
- Batch-normalizing sound libraries, game audio stems, or sync cues to an identical integrated loudness target and true-peak ceiling.

## How it works

- Upload up to 20 audio tracks or a single ZIP archive to measure each file's integrated LUFS and true-peak levels using the EBU R128 standard.
- Select a streaming preset or custom LUFS target, then choose your matching mode: Album (one shared gain), Hybrid (tolerance-bounded), or Per-track (uniform loudness).
- Configure true-peak ceiling safety (dBTP), hybrid tolerance (LU), optional limiter stages for peak control, and your preferred lossless output format (WAV or FLAC).
- Download the generated ZIP containing re-metered lossless audio files, a per-track CSV gain sheet, and a complete match report.

## Use cases

- Mastering engineers preparing album masters for Spotify or Apple Music without compressing delicate track-to-track dynamic transitions.
- Podcast producers compiling multi-host segments into a cohesive show bounded within a strict ±2 LU loudness tolerance window.
- Sync licensing libraries standardizing varied catalog submissions to a uniform -16 LUFS broadcast target.

## Frequently asked questions

### How does Album mode preserve natural volume differences between songs?

Album mode calculates the energy-weighted loudness of the entire batch using the EBU R128 segment formula and applies one identical gain offset to every track, keeping quiet ballads softer than loud singles.

### What is the difference between Hybrid mode and Per-track mode?

Per-track mode normalizes every track to the exact target LUFS, while Hybrid mode keeps track loudness differences intact within a chosen LU tolerance window and only adjusts outliers.

### How does the tool prevent true-peak distortion and clipping?

True-peak protection monitors all tracks against your specified dBTP ceiling. In Album mode, the entire album gain is reduced to prevent clipping; in Hybrid and Per-track modes, peaks are trimmed or limited.

### What upload formats and file limits are supported?

You can upload individual audio files or a ZIP archive containing up to 20 tracks, with a maximum upload file size of 100 MB.

### What files are included in the downloadable result?

The output ZIP contains your processed WAV or FLAC files, a detailed match-report JSON with measured-after values, and a CSV gain sheet summarizing LUFS and peak adjustments.

## Related tools

- [Audio Add Silence](https://test.elysiatools.com/en/tools/audio-add-silence): Add a specified duration of silence to the start or end of an audio file. The output keeps the source sample rate and channels by default.
- [Audio Ambience Loop Generator](https://test.elysiatools.com/en/tools/audio-ambience-loop-generator): Extract the background ambience/room tone from a fragment and generate a seamless loop of any target length.
- [Audio Band-Pass Filter](https://test.elysiatools.com/en/tools/audio-band-pass-filter): Allow only a specific band of frequencies to pass
- [Batch Audio Normalize](https://test.elysiatools.com/en/tools/audio-batch-normalize): Normalize multiple audio files to a target peak level with consistent volume across the batch
- [Audio Beat Matcher](https://test.elysiatools.com/en/tools/audio-beat-matcher): Adjust tempo to match a target BPM
- [Audio Fade In](https://test.elysiatools.com/en/tools/audio-fade-in): Apply a fade-in effect to the beginning of the audio
- [Audio Fade Out](https://test.elysiatools.com/en/tools/audio-fade-out): Apply a fade-out effect to the end of the audio
- [Invert Channel Phase](https://test.elysiatools.com/en/tools/audio-invert-phase): Free online phase inverter: flip the phase of the left, right, or both channels of a stereo audio file for vocal reduction or creative stereo effects. Upload MP3, WAV, FLAC and more, up to 100 MB.

## Samples

- [Copyright-Free FLAC Audio Samples](https://test.elysiatools.com/en/samples/flac-samples): Lossless FLAC audio samples for testing and development, mirrored from MP3 set with nature sounds and meditation music
- [Copyright-Free MP3 Audio Samples](https://test.elysiatools.com/en/samples/mp3-samples): Collection of royalty-free audio samples for testing and development purposes including nature sounds, meditation music, and ambient audio
- [Copyright-Free WAV Audio Samples](https://test.elysiatools.com/en/samples/wav-samples): Uncompressed PCM WAV audio samples for testing and development, mirrored from MP3 set with nature sounds and meditation music
- [Copyright-Free Raw PCM Audio Samples](https://test.elysiatools.com/en/samples/pcm-samples): Raw PCM s16le audio samples featuring nature ambience and relaxing music for waveform, playback, and conversion workflows

## Related content

- [Album Digital Release Preflight and Delivery](https://test.elysiatools.com/en/hubs/album-digital-release-preflight-and-delivery): Check one finished album's order, tags, loudness relationships and transitions, then assemble and verify a digital distribution package with cover art and reports.
