# Extended BMR Calculator (Mifflin / Schofield Multi-Formula Comparison)

Compare Mifflin-St Jeor, original and revised Harris-Benedict, Schofield (FAO/WHO/UNU), and Katch-McArdle BMR equations side by side with mean and spread in kcal/day. Not medical advice.

> Canonical page: https://test.elysiatools.com/en/tools/basal-metabolic-rate-ext

- **Category:** Health

- **Keywords:** bmr, basal metabolic rate, mifflin st jeor, harris benedict, schofield equation, katch mcardle, calorie calculator, resting energy expenditure, metabolism, nutrition, energy expenditure

## Overview

The Extended BMR Calculator computes and compares your basal metabolic rate across multiple standard scientific formulas—including Mifflin-St Jeor, original and revised Harris-Benedict, Schofield (FAO/WHO/UNU), and Katch-McArdle. By evaluating these models side by side, it provides a comprehensive breakdown of your daily resting calorie expenditure along with average and variance metrics.

## Inputs

- **Sex** (select): Sex used by the sex-specific equations.
- **Weight (kg)** (number): Body weight in kilograms.
- **Height (cm)** (number): Height in centimeters.
- **Age (years)** (number): Age in years (18–100).
- **Lean Body Mass (kg, optional)** (number): Optional lean body mass in kg; enables the Katch-McArdle formula (370 + 21.6×LBM).
- **Decimal Places** (number)

## When to use

- When designing personalized calorie targets for nutrition or weight management programs.
- When evaluating discrepancies between different metabolic prediction equations for a single individual.
- When factoring in lean body mass to assess metabolic rate for athletic or muscular body compositions.

## How it works

- Enter biological sex, body weight in kilograms, height in centimeters, and age in years.
- Optionally enter lean body mass in kilograms to include the composition-based Katch-McArdle formula.
- Set the desired decimal precision for the calculated energy values.
- Review each formula's individual estimate alongside the overall mean and spread in kcal/day.

## Use cases

- Nutritionists establishing reliable baseline calorie intervals across different demographic formulas.
- Athletes comparing standard anthropometric equations against lean-mass-adjusted resting expenditure.
- Fitness coaches evaluating calorie variance to fine-tune daily energy intake for clients.

## Frequently asked questions

### Which BMR formula is considered the most accurate baseline?

The Mifflin-St Jeor equation is widely adopted as the clinical standard by organizations like the Academy of Nutrition and Dietetics for non-athletic adults.

### Why do different BMR formulas produce different results?

Equations rely on distinct historical datasets, age bands, and demographic populations, causing variations in how weight, height, and age influence the baseline.

### When should I enter lean body mass?

Provide lean body mass if you have body composition data, which activates the Katch-McArdle formula to account for metabolically active tissue.

### What does the spread metric represent?

The spread represents the numerical difference in kcal/day between the highest and lowest formula estimates for your inputs.

### Does this tool provide clinical medical advice?

No, it generates mathematical estimates for nutritional planning and educational comparisons and is not a substitute for medical consultation.

## Related tools

- [AsciiMath LaTeX MathML Equation Converter](https://test.elysiatools.com/en/tools/asciimath-latex-mathml-equation-converter): Convert equations between AsciiMath, LaTeX and MathML: auto-detect the input format, produce canonical LaTeX, presentation MathML with an embedded TeX annotation, a best-effort AsciiMath back-translation, a screen-reader aria-label snippet (role=math), and a KaTeX HTML preview.
- [Cell Confluency Estimator (Microscopy Grid Method)](https://test.elysiatools.com/en/tools/confluency-estimator): Estimate adherent-cell confluency with the grid-count method: confluency% = occupied/total squares × 100 per field, with multi-field mean ± SD and optional time-to-target from the doubling time.
- [ECharts Theme Token Extractor](https://test.elysiatools.com/en/tools/echarts-theme-token-extractor): Extract design tokens — colors, numbers, font sizes and strings — from an ECharts theme JSON and export them straight into your design system. Paste a theme object (the kind registered via echarts.init(dom, themeName)) and the tool walks every leaf, tagging each color (with optional named/rgb → hex normalization), spacing number, font size and string, then emits clean CSS variables, a Tailwind theme.extend config, Style Dictionary tokens.json, or SCSS variables. Bridges the gap between an ECharts visualization theme and Figma/CSS/Tailwind design tokens without copying each value by hand.
- [Free Water Clearance Calculator](https://test.elysiatools.com/en/tools/free-water-clearance): Calculate solute-free water clearance (C_H₂O) and electrolyte-free water clearance (eC_H₂O) to differentiate hypo-/hypernatremia. Classic: C_H₂O = V·(1 − U_osm/P_osm); positive = dilute urine excreting free water (diabetes insipidus, polydipsia, water-load recovery), negative = concentrated urine conserving free water (dehydration, SIADH). Electrolyte-free: eC_H₂O = V·(1 − (U_Na + U_K)/P_Na), which better predicts the direction of serum sodium change — a negative eC_H₂O means the urine is electrolyte-free-water-rich and tends to raise serum Na⁺, informing IV fluid choice. Optional Na/K inputs enable the electrolyte-free calculation. Derived from Rose, Shimizu 2002 (Nephron), and NephSIM. Point estimate; interpret with full clinical context. Not medical advice.
- [Galvanic Cell EMF Calculator](https://test.elysiatools.com/en/tools/galvanic-cell-emf): E⁰cell = E⁰cathode − E⁰anode with ΔG⁰, the spontaneity verdict, and log₁₀K at 25 °C.
- [HRV-Based Recovery & Readiness Score](https://test.elysiatools.com/en/tools/hrv-recovery-readiness-score): Scores today’s recovery 0-100 from morning HRV (rMSSD/SDNN) and resting heart rate z-scores against your own rolling baseline, blended with last night’s sleep and yesterday’s session RPE — with a green/amber/red tier, meaningful-change (0.5 SD) detection, baseline noise (CV) check, and an intensity-ceiling training recommendation.
- [Mean Arterial Pressure (MAP)](https://test.elysiatools.com/en/tools/mean-arterial-pressure): Calculate MAP = DBP + (SBP − DBP)/3. Normal 70–100; ≥65 sepsis target; <65 hypoperfusion. Derived from Geddes 1984, SSC 2021, BTF 2017, StatPearls, LITFL. Not medical advice.
- [Mean Platelet Volume (MPV) Analyzer](https://test.elysiatools.com/en/tools/mean-platelet-volume-analyzer): Analyze Mean Platelet Volume (MPV) in fL, an index of platelet production kinetics. Reference range ≈ 7.5–11.5 fL (lab- and method-dependent). Low MPV (< 7.5 fL, small old platelets) indicates suppressed marrow production (aplastic anemia, chemotherapy/radiation, recent platelet transfusion, iron-deficiency regeneration, Wiskott-Aldrich). High MPV (> 11.5 fL, large young platelets) indicates peripheral destruction with compensatory turnover or macrothrombocytopenia (immune thrombocytopenia ITP, post-splenectomy, myeloproliferative neoplasms, severe sepsis in recovery, Bernard-Soulier / MYH9, megaloblastic anemia; elevated MPV after acute MI marks platelet activation and adverse prognosis). Optionally enter the platelet count to refine the differential: low platelets + high MPV → peripheral destruction; low + low → underproduction; high + low → reactive thrombocytosis; high + high → myeloproliferative neoplasm. Pre-analytical caveat: platelets swell in EDTA over ~2 h raising MPV, and values are method-dependent (impedance > optical > immuno) — compare within the same lab and analyzer. Derived from Bath 1996, Leader 2012, Vagdatli 2010, and MDCalc. Not medical advice.

## Samples

- [Web Image Processing Python Samples](https://test.elysiatools.com/en/samples/web-image-processing-python): Web Python image processing examples using PIL/Pillow including reading, saving, resizing, and format conversion
- [Multi-Tenant Architecture Samples](https://test.elysiatools.com/en/samples/multi-tenant): Comprehensive multi-tenant architecture patterns covering data isolation, tenant management, resource quotas, and white-label solutions
- [Android Image Processing Java Samples](https://test.elysiatools.com/en/samples/android-image-processing-java): Android Java image processing examples including reading/saving images, scaling, and format conversion
- [Android Image Processing Kotlin Samples](https://test.elysiatools.com/en/samples/android-image-processing-kotlin): Android Kotlin image processing examples including reading/saving images, scaling, and format conversion
