# HYROX Race Station Split and Sled Loading Planner

Plan a HYROX race end to end: per-lap 1 km run splits under an even, negative-split or fade strategy, auto-distributed station targets for your finish time, the 8 Roxzone transition budget, and your division’s official sled push/pull weights with the plate stack to load.

> Canonical page: https://test.elysiatools.com/en/tools/hyrox-race-station-split-and-sled-loading-planner

- **Category:** Sports

- **Keywords:** hyrox planner, hyrox pacing, sled push weight, roxzone time, hyrox station splits, wall balls pace, hyrox open pro weights

## Overview

Weights, distances and rep counts are the official HYROX Singles rulebook values (season 26/27): SkiErg 1000 m; Sled Push and Sled Pull 4 × 12.5 m at 102/152/202 kg and 78/103/153 kg including the sled; 80 m Burpee Broad Jumps; Row 1000 m; Farmer’s Carry 200 m with 2 × 16/24/32 kg; Sandbag Lunges 100 m with 10/20/30 kg; Wall Balls 100 reps with 4/6/9 kg to 2.70 m (women) / 3.00 m (men). Doubles and Team Relay race with Open weights. The planner budgets 8 Roxzone transitions (one after each station, per HYROX split data), distributes any station budget you do not override proportionally to station difficulty, and prints a second-by-second timeline with per-station derived pace (/500 m erg splits, reps/min, seconds per 12.5 m sled length). Sled loading shows the official plate stacks (+50/+100/+150 kg push, +25/+50/+100 kg pull) plus a computed breakdown from your venue sled’s base weight.

## Inputs

- **Division** (select)
- **Target finish (minutes)** (number): 90
- **1 km run pace (m:ss)** (text): 5:30
- **Pacing strategy** (select)
- **Roxzone per transition (seconds)** (number): 90
- **Station time overrides** (textarea): skierg=4:30 sled-push=1:30 wall-balls=4:00 (accepts m:ss or seconds; keys: skierg, sled-push, sled-pull, bbj, row, farmers, lunges, wall-balls)
- **Sled base weight (kg)** (number): 52

## When to use

- Setting target lap times and station benchmarks before a competitive HYROX race.
- Calculating exact sled push and sled pull plate combinations based on your division and venue sled weight.
- Evaluating different running strategies such as negative splits or fade pacing to hit a total finish goal.

## How it works

- Select your division (Women Open/Pro or Men Open/Pro) and define your target finish time and baseline running pace.
- Choose a pacing strategy (Even, Negative Split, or Fade) and allocate an estimated Roxzone transition budget.
- Optionally enter custom station duration overrides or adjust your venue's sled base weight.
- Generate an interactive timeline detailing 1 km run laps, transition times, station-specific paces, and official plate stacks.

## Use cases

- Open and Pro athletes calculating target /500 m erg splits and wall ball repetition tempos to prevent early burnout.
- Coaches building structured race plans tailored to an athlete's proven running capacity and station strengths.
- Racers verifying plate loading numbers and transition allowances to keep on schedule inside the Roxzone.

## Frequently asked questions

### What weights and standards does the planner follow?

It follows official HYROX Singles standards for SkiErg, Sled Push, Sled Pull, Burpee Broad Jumps, Rowing, Farmer's Carry, Sandbag Lunges, and Wall Balls.

### How are station splits calculated if no overrides are provided?

The planner deducts total run time and all eight Roxzone transitions from your target finish time, distributing the remaining budget proportionally across stations based on standard difficulty.

### Can I lock in specific target times for my strongest or weakest stations?

Yes, you can use the station overrides field to pin exact times for individual stations using mm:ss or total seconds.

### How does the sled loading breakdown work?

It takes the official target weight for your division and subtracts the specified sled base weight to calculate the exact plate stack needed.

### What running pacing strategies are supported?

You can select Even pacing for consistent 1 km lap times, Negative Split for faster later laps, or Fade to simulate gradual fatigue.

## Related tools

- [Powerlifting Coefficient (DOTS / IPF GL) Calculator](https://test.elysiatools.com/en/tools/powerlifting-coefficient-dots-ipf-calculator): Compare a powerlifting total across four strength coefficient systems side by side: DOTS, Wilks (1994), IPF GL Points and Goodlift. Enter sex, body weight and three-lift total (squat + bench + deadlift) in kg or lb, and see each formula's points, coefficient, relative-strength tier and a progress bar showing how close the total is to each system's elite threshold. Complements the existing Wilks calculator by adding DOTS and IPF GL rather than replacing it.
- [Triathlon T1/T2 Transition + Bike CdA/Yaw + Off-the-Bike Pacing Planner](https://test.elysiatools.com/en/tools/triathlon-t1-t2-transition-bike-cda-aero-yaw-wind-deficit-pacing-planner): Plan long-course triathlon execution: T1/T2 transition checklists and time budgets, segment-by-segment bike pacing from the road-load power model with CdA 0.18–0.30 and yaw-dependent aero, run-off-the-bike pace targets with running-economy decay, and race-day carb/fluid totals.
- [Running Pace & Heart Rate Zone Calculator](https://test.elysiatools.com/en/tools/running-pace-heart-rate-zone-calculator): Predict race times, calculate heart-rate zones, and build pace conversion tables from a recent race result
- [NFL Passer Rating & MLB ERA/WHIP Calculator](https://test.elysiatools.com/en/tools/nfl-passer-rating-mlb-era-whip-calculator): Compute the official NFL quarterback passer rating (0–158.3) with component breakdown, and MLB pitching stats ERA and WHIP with baseball innings notation.
- [Stryd Running Power Critical Power & W′bal Reconstructor](https://test.elysiatools.com/en/tools/stryd-running-power-critical-power-and-w-prime-bal-reconstructor): Derive your running Critical Power (CP) and W′ (anaerobic work capacity) from a 3-minute all-out test, power–time trial pairs, or distance–time trials, then replay a Stryd power session (.fit/.tcx/CSV) second by second: W′bal depletion and recovery timeline under the Skiba 2012 integral model and the Froncioni/Skiba/Clarke differential model, time-to-exhaustion forecasts, Stryd zone distribution (Easy/Moderate/Threshold/Interval/Repetition) and a dual-panel power/W′bal chart.
- [US Sailplane IGC / XCscore / FAI Badge Flight Validator](https://test.elysiatools.com/en/tools/us-sailplane-soaring-xcscore-flight-igc-fai-badge-declaration-validator): Parse an FAI IGC flight-recorder file (A/H/I/C/B/F/L/G records) end to end and audit it like a badge secretary: takeoff/release/landing detection (ENL engine-noise or tow kinematics), total altitude gain, OLC/XCscore-style optimal free distance over the convex hull, best FAI triangle against the 28% shortest-side rule, out-and-return distance, pre-flight C-record declaration chain (declared-before-takeoff, task shape, FAI triangle check), loss-of-height rules, and the G-record security audit with signed-stream coverage reconstruction (H O/P and non-manufacturer L records excluded per the IGC specification). Evaluates Silver / Gold / Diamond badge elements and the 750 km + 250 km diploma ladder.
- [Marathon Time Predictor](https://test.elysiatools.com/en/tools/marathon-time): Predict marathon finish time based on recent race performance using running formulas
- [A1Z26 Letter-Number Workbench](https://test.elysiatools.com/en/tools/a1z26-letter-number-workbench): Convert between letters and numbers (A=1, B=2, … Z=26) with configurable separator and case, decode numbers back to letters, and compute the letter sum of any text.

## Samples

- [Web Image Processing Python Samples](https://test.elysiatools.com/en/samples/web-image-processing-python): Web Python image processing examples using PIL/Pillow including reading, saving, resizing, and format conversion
- [Android Image Processing Java Samples](https://test.elysiatools.com/en/samples/android-image-processing-java): Android Java image processing examples including reading/saving images, scaling, and format conversion
- [Android Image Processing Kotlin Samples](https://test.elysiatools.com/en/samples/android-image-processing-kotlin): Android Kotlin image processing examples including reading/saving images, scaling, and format conversion
- [Web Image Processing Rust Samples](https://test.elysiatools.com/en/samples/web-image-processing-rust): Web Rust image processing examples including image read/save, scaling, and format conversion
