Elysia Tools

Browse tools, examples, visual explainers, and topic guides from one clear workspace.

Top Categories

Hubs

Language
ZHDERUPTENFRES

Elysia Tools

Navigation

Media

DTMF Decoder

· Last updated:2026-10-15

Detect DTMF touch-tone digits in any recording and recover the keypad sequence with timestamps. Goertzel filter bank per ITU-T Q.23/Q.24 — measures both tone frequencies, twist and duration for every keypress.

Details

What this tool helps you do

This decoder follows the classic DTMF detection architecture: audio is decoded to 8 kHz mono, then a bank of Goertzel filters runs over 205-sample frames — the block size that minimizes frequency-bin error for the 8 Q.23 tones — with extra second-harmonic filters to reject speech falsing. Every detected keypress reports its start time, duration, both measured frequencies (parabolic-interpolated to sub-bin precision), twist (high-group power relative to low group), frequency deviation in percent, and a confidence score. Acceptance rules mirror ITU-T Q.24 receiver guidance: tones must last ≥ 40 ms (adjustable), pauses ≥ 40 ms, frequency deviation within ±1.8% (strict mode: ±1.5%), deviations beyond ±3.5% rejected, and twist inside −8…+4 dB with receiver-style margin. The A–D fourth-column signals can be toggled off for real-world recordings where they only cause false hits. Honest scope: this decodes clean and moderately noisy DTMF (IVR prompts, voicemail, film props); it is not a telephony-grade talk-off-hardened decoder.

Execution

Run this tool

Fill in the form, run the tool, and review the result in one place.

Samples

Examples that match this tool

Related

Continue with connected tools and hubs

Written by the Elysia Tools team

Tool usage guide

Learn when to use this tool, what it supports, and how real users apply it.

Key facts

Category
Media
Input types
file, number, select, checkbox
Output type
json
Sample coverage
4
API ready
Yes

Overview

The DTMF Decoder analyzes audio recordings to detect dual-tone multi-frequency keypad signals and extract the dialed sequence with precise timestamps. Built on a Goertzel filter bank adhering to ITU-T Q.23 and Q.24 standards, the tool measures dual-tone frequencies, signal duration, twist, and frequency deviation for every detected keypress.

When to use

  • Extracting dialed digits, menu selections, or phone numbers from call center and IVR recordings.
  • Auditing DTMF tone parameters such as frequency drift, twist, and minimum tone duration in telecom testing.
  • Transcribing keypad tones from voicemail messages, radio transmissions, or film sound design props.

How it works

  1. 1The input audio is converted to an 8 kHz mono stream and processed in 205-sample blocks to optimize frequency bin resolution.
  2. 2A Goertzel filter bank identifies the low and high tone frequency groups while secondary harmonic filters suppress false triggers from human speech.
  3. 3Detected tones are validated against ITU-T Q.24 acceptance criteria for duration, twist range, and frequency deviation thresholds.
  4. 4The decoder outputs a structured JSON report detailing the recovered key sequence, start times, durations, and tone metrics.

Use cases

  • Telecom QA engineers verifying that IVR dialers emit Q.23-compliant tone durations and frequencies.
  • Investigators extracting entered PIN codes or routing extensions from audio recordings.
  • Audio archivists cataloging and transcribing vintage telephone tone signals from field recordings.

Examples

1. Decoding an IVR Navigation Recording

VoIP Support Specialist

Background

A support specialist needs to verify customer menu selections captured in an automated support line audio log.

Problem

Manual listening to tone bursts is slow and error-prone when documenting dialed customer digits.

How to use

Upload the IVR audio recording, set strictness to standard, and disable fourth-column detection.

minToneMs: 40, strictness: standard, detectFourthColumn: false

Outcome

Returns the exact dialed digits with millisecond timestamps and confirms that tone lengths met telephony minimums.

2. Verifying Tone Tolerances on Dialing Hardware

Hardware Test Engineer

Background

An engineer is qualifying an analog telephone adapter under varied line conditions.

Problem

The hardware must strictly adhere to ITU-T Q.24 acceptance bounds to pass certification.

How to use

Upload a WAV capture of test tones, enable fourth-column detection, and set detection strictness to strict.

FAQ

What audio formats can be decoded?

The decoder accepts WAV, MP3, FLAC, M4A, OGG, AAC, and OPUS audio files up to 100 MB.

What is the difference between standard and strict detection modes?

Standard mode accepts frequency deviations up to ±1.8% with 6 dB margins, whereas strict mode requires deviations within ±1.5% with 9 to 12 dB margins to prevent false positives.

Why should I disable fourth-column (A–D) detection?

Most commercial phone systems only use digits 0–9, *, and #; disabling the 1633 Hz fourth column prevents false triggers caused by background noise or voices in real-world recordings.

What is the minimum tone duration requirement?

By default, the decoder requires tone bursts and inter-digit pauses of at least 40 ms, which can be adjusted up to 200 ms.

What is twist in DTMF measurements?

Twist measures the power ratio between the high-frequency and low-frequency tone groups, with acceptable signals typically falling between −8 dB and +4 dB.

Home
Tools3212
Samples593
Visualizations471
Viewers103
Hubs239
Tags333
Images, Audio & Video657

Image, audio, and video processing, conversion, and optimization tools

Math, Date & Finance647

Calculators, numerics, date logic, statistics, and finance tools

Design & Color298

Color, layout, graphics, visual styling, and design helper tools

Text & Writing209

Writing, cleanup, formatting, extraction, and text analysis tools

Developer & Web193

Developer utilities, networking, web debugging, and automation helpers

Conversion & Encoding175

Format, file, archive, unit, and encoding conversion tools

Lead Generation Quiz Launch and Contact Handoff
Memorial Drafts: Family Review and Print Handoff
Private Habit Records: Backup, Restore and Sharing Review
Article to X and LinkedIn Drafts: Fact Review and Handoff
Markdown Interactive Deck Review and Offline Handoff

© 2026 Elysia Tools. All rights reserved.

DocsPricingAboutTerms of ServicePrivacy PolicyCookiesContact
Media

Copyright-Free FLAC Audio Samples

Lossless FLAC audio samples for testing and development, mirrored from MP3 set with nature sounds and meditation music

Media

Copyright-Free MP3 Audio Samples

Collection of royalty-free audio samples for testing and development purposes including nature sounds, meditation music, and ambient audio

Media

Copyright-Free WAV Audio Samples

Uncompressed PCM WAV audio samples for testing and development, mirrored from MP3 set with nature sounds and meditation music

Media

Copyright-Free M4A Audio Samples

Apple iTunes compatible M4A audio samples with AAC encoding, optimized for quality and file size balance

Media

Audio Melody Contour Extractor

Extract a dominant melody path from audio and export MIDI, note events, a pitch contour, SVG, and JSON in one ZIP.

Media

Audio Chord Progression Detector

Estimate an audio file's chord sequence locally and download CSV, JSON, SVG, and method notes in one ZIP.

Health

Hearing Safety Checker

Estimate your listening-exposure risk against NIOSH (85 dBA/8h, 3 dB exchange), OSHA (90 dBA/8h, 5 dB) and WHO-ITU H.870 weekly allowance — enter level, duration and sessions, or upload the audio you listen to for measured duration and loudness.

Media

Batch Audio Converter

Convert multiple audio files between different formats like MP3, WAV, FLAC, AAC, OGG, Opus with quality settings and batch processing

minToneMs: 40, strictness: strict, detectFourthColumn: true

Outcome

Receives detailed sub-bin frequency deviations, twist figures, and confidence ratings for all 16 keypad characters.