Elysia Tools

Browse tools, examples, visual explainers, and topic guides from one clear workspace.

Top Categories

Hubs

Language
ZHDERUPTENFRES

Elysia Tools

Navigation

Media

DTMF Tone Generator

· Last updated:2026-10-15

Generate ITU-T Q.23/Q.24-compliant DTMF touch-tone sequences (0-9, *, #, A-D) as audio files — IVR prompts, PBX testing, film props, decoder development. Tone/pause timing, twist and level configurable, Q.24 compliance checked.

Details

What this tool helps you do

Dual-Tone Multi-Frequency signaling uses one low-group (697/770/852/941 Hz) and one high-group (1209/1336/1477/1633 Hz) sine per key, per ITU-T Q.23. This generator synthesizes any keypad sequence with exact per-digit timing and encodes it to WAV, MP3, FLAC, M4A or OGG. Defaults follow the Q.24 receiver recommendations: tone ≥ 40 ms (default 90 ms), pause ≥ 40 ms (default 60 ms), signalling velocity ≤ 10 digits/s, and twist — the high-group power relative to the low group — kept inside the −8…+4 dB acceptance window. Every tone edge gets a 5 ms raised-cosine ramp so clips never click while the mark duration stays compliant. A compliance flag reports whether your exact settings would be detected by a Q.24-conformant receiver. Output at 8 kHz for telephone-authentic audio or 44.1 kHz for studio use; repeat the whole sequence up to 10× for loop testing.

Execution

Run this tool

Fill in the form, run the tool, and review the result in one place.

Samples

Examples that match this tool

Related

Continue with connected tools and hubs

Written by the Elysia Tools team

Tool usage guide

Learn when to use this tool, what it supports, and how real users apply it.

Key facts

Category
Media
Input types
text, number, select
Output type
file
Sample coverage
4
API ready
Yes

Overview

Generate precise, ITU-T Q.23 and Q.24-compliant DTMF touch-tone audio sequences for keypad digits 0-9, *, #, and A-D. Synthesize telephone signaling tracks directly in your browser with fine-grained control over tone mark duration, pause duration, twist, signal level, sample rates, and file formats.

When to use

  • Testing PBX switches, VoIP gateways, and IVR routing trees with repeatable dialed numbers.
  • Benchmarking DTMF decoder algorithms against variable twist, short mark intervals, or low signal levels.
  • Producing telephone dialing sound effects and touch-tone audio props for film, theater, or podcast production.

How it works

  1. 1Enter a digit sequence using valid DTMF characters (0-9, *, #, A-D) and choose mark and pause lengths in milliseconds.
  2. 2Adjust tone twist to simulate frequency attenuation, set output level in dBFS, and select either an 8 kHz telephony or 44.1 kHz studio sample rate.
  3. 3Synthesize the dual-sine audio waveform with smooth 5 ms raised-cosine edge ramps to prevent transient clicks, while automatically verifying ITU-T Q.24 compliance.
  4. 4Export the generated tone burst sequence directly to your preferred audio container (WAV, MP3, FLAC, M4A, or OGG).

Use cases

  • VoIP and IVR Quality Assurance: Feed controlled DTMF bursts into SIP trunks to test digit recognition and timeout handling.
  • Firmware and Hardware Decoder Testing: Generate edge-case sequences with negative twist and minimum duration to validate DSP tone-detector reliability.
  • Film Sound Design: Generate clean, artifact-free telephone keypad dial cues encoded at broadcast-standard sample rates.

Examples

1. Standard 10-Digit North American Dialing Sequence

VoIP Engineer

Background

An engineer needs to verify that a hosted IVR gateway reliably captures dialed customer numbers over SIP trunk lines.

Problem

Manual keypad dialing through softphones produces inconsistent timing and unpredictable line noise during automated testing.

How to use

Input the test phone number, keep the standard 90 ms mark and 60 ms space intervals at 44.1 kHz, and export as a lossless WAV file.

digits: "1705551234", toneMs: 90, pauseMs: 60, twistDb: 0, levelDb: -9, sampleRate: "44100", format: "wav", repeats: 1

Outcome

A clean 1.44-second WAV audio file fully compliant with Q.24 detection criteria.

2. Lossy Line Simulation with Priority Keypad Characters

DSP Firmware Developer

Background

A firmware developer is tuning an embedded Goertzel DTMF decoder to detect signaling across degraded copper lines.

Problem

The decoder needs testing against high-frequency line roll-off and the rarely used A-D control column.

How to use

FAQ

What frequencies are synthesized for each DTMF digit?

Per ITU-T Q.23, each key combines one low-group tone (697, 770, 852, or 941 Hz) and one high-group tone (1209, 1336, 1477, or 1633 Hz).

What is twist in DTMF signaling?

Twist measures the power difference in decibels between the high-frequency and low-frequency tone groups, within a standard acceptance window of −8 dB to +4 dB.

Why include a 5 ms raised-cosine ramp on tone edges?

The ramp rounds the leading and trailing edges of each tone burst to eliminate audible switching clicks without violating minimum detection duration.

When should I select 8 kHz instead of 44.1 kHz?

Select 8 kHz to simulate standard G.711 narrow-band telephony audio, and use 44.1 kHz for broadcast, podcasting, or general multimedia playback.

Are the military and routing tones A, B, C, and D supported?

Yes, letters A through D represent the fourth-column high-frequency tone (1633 Hz) paired across each of the four standard low-frequency tones.

Home
Tools3212
Samples593
Visualizations471
Viewers103
Hubs239
Tags333
Images, Audio & Video657

Image, audio, and video processing, conversion, and optimization tools

Math, Date & Finance647

Calculators, numerics, date logic, statistics, and finance tools

Design & Color298

Color, layout, graphics, visual styling, and design helper tools

Text & Writing209

Writing, cleanup, formatting, extraction, and text analysis tools

Developer & Web193

Developer utilities, networking, web debugging, and automation helpers

Conversion & Encoding175

Format, file, archive, unit, and encoding conversion tools

Lead Generation Quiz Launch and Contact Handoff
Memorial Drafts: Family Review and Print Handoff
Private Habit Records: Backup, Restore and Sharing Review
Article to X and LinkedIn Drafts: Fact Review and Handoff
Markdown Interactive Deck Review and Offline Handoff

© 2026 Elysia Tools. All rights reserved.

DocsPricingAboutTerms of ServicePrivacy PolicyCookiesContact
Media

Copyright-Free FLAC Audio Samples

Lossless FLAC audio samples for testing and development, mirrored from MP3 set with nature sounds and meditation music

Media

Copyright-Free MP3 Audio Samples

Collection of royalty-free audio samples for testing and development purposes including nature sounds, meditation music, and ambient audio

Media

Copyright-Free WAV Audio Samples

Uncompressed PCM WAV audio samples for testing and development, mirrored from MP3 set with nature sounds and meditation music

Media

Copyright-Free Raw PCM Audio Samples

Raw PCM s16le audio samples featuring nature ambience and relaxing music for waveform, playback, and conversion workflows

Media

Lossy Codec Preview Compare

Hear and measure what streaming does to your master: encode to MP3, AAC or Opus at real streaming bitrates, decode back, and compare loudness shift, true-peak overshoot and headroom against the original — the Apple Digital Masters round-trip audition as a report plus downloadable preview files.

Media

DTMF Decoder

Detect DTMF touch-tone digits in any recording and recover the keypad sequence with timestamps. Goertzel filter bank per ITU-T Q.23/Q.24 — measures both tone frequencies, twist and duration for every keypress.

Media

DSD to PCM Converter

Convert DSD (Direct Stream Digital) audio files to PCM WAV format with selectable bit depth and sample rate

Media

Audio Hash

Generate cryptographic hashes (checksums) for audio files

Enter a sequence with fourth-column digits, reduce twist to −3 dB, select 8000 Hz sample rate, and set the sequence to repeat twice.

digits: "A8#D", toneMs: 100, pauseMs: 80, twistDb: -3, levelDb: -12, sampleRate: "8000", format: "mp3", repeats: 2

Outcome

An 8 kHz telephony-style MP3 loop with negative twist to stress-test high-group tone attenuation handling.