Elysia Tools

Browse tools, examples, visual explainers, and topic guides from one clear workspace.

Top Categories

Hubs

Language
ZHDERUPTENFRES

Elysia Tools

Navigation

Math & Numbers

Concrete Mix Design (ACI 211)

· Last updated:2026-07-18

Design a normal-weight concrete mix per ACI 211.1-91 absolute-volume method. Inputs: slump, nominal max aggregate size, air entrainment, water-cement ratio w/c, fineness modulus of sand, and dry-rodded coarse-aggregate density. Outputs the per-cubic-meter masses of cement, water, fine and coarse aggregate plus the mass ratio.

Execution

Run this tool

Fill in the form, run the tool, and review the result in one place.

Samples

Examples that match this tool

Related

Continue with connected tools and hubs

Written by the Elysia Tools team
Math502
Size88
Ratio55
Mass22
Mix22
Civil Engineering16

Tool usage guide

Learn when to use this tool, what it supports, and how real users apply it.

Key facts

Category
Math & Numbers
Input types
select, number
Output type
json
Sample coverage
4
API ready
Yes

Overview

This Concrete Mix Design calculator simplifies the process of proportioning normal-weight concrete mixtures using the ACI 211.1-91 absolute-volume method. By inputting key physical properties of your aggregates and design requirements, you can instantly calculate the required masses of cement, water, fine aggregate, and coarse aggregate per cubic meter, along with their corresponding mass ratios.

When to use

  • When proportioning trial batches of normal-weight concrete for civil engineering and construction projects according to ACI 211.1-91 standards.
  • When adjusting mix designs based on changing aggregate properties, such as sand fineness modulus or coarse aggregate dry-rodded density.
  • When estimating material quantities (cement, water, sand, and gravel) required per cubic meter of concrete for budgeting and procurement.

How it works

  1. 1Select the design slump range, nominal maximum aggregate size, and air entrainment status to determine the mixing water requirement and air content.
  2. 2Enter the target water-cement (w/c) ratio, the fineness modulus of the sand, and the dry-rodded density of the coarse aggregate.
  3. 3The tool performs lookups based on ACI 211.1-91 tables to determine the volume of coarse aggregate and the net water content.
  4. 4It applies the absolute-volume method to calculate the remaining volume for fine aggregate, outputting the final batch weights per cubic meter and the mass ratios.

Use cases

  • Civil engineers designing trial mixes for structural concrete elements.
  • Concrete batch plant operators verifying mix proportions against project specifications.
  • Construction materials students learning the ACI 211.1-91 absolute-volume design procedure.

Examples

1. Non-Entrained Concrete Mix Design

Structural Engineer

Background

A structural engineer needs to design a standard non-entrained concrete mix for an indoor foundation slab requiring a slump of 75-100 mm and a maximum aggregate size of 19 mm.

Problem

Calculate the exact mass of cement, water, sand, and coarse aggregate per cubic meter for a target w/c ratio of 0.45.

How to use

Select a slump of 75-100 mm, maximum aggregate size of 19 mm, and non-entrained air. Enter 0.45 for the water-cement ratio, 2.70 for the sand fineness modulus, and 1600 kg/m³ for the coarse aggregate dry-rodded density.

slump: 75-100, maxSize: 19, air: non-entrained, wcRatio: 0.45, finenessModulus: 2.7, caDensity: 1600

Outcome

The tool outputs a mix design requiring 455.56 kg of cement, 205 kg of water, 1008 kg of coarse aggregate, and 662.50 kg of sand per cubic meter, with a mass ratio of 1 : 0.45 : 1.45 : 2.21.

2. Entrained Air Mix for Freeze-Thaw Exposure

Concrete Quality Control Inspector

Background

An inspector needs to verify a mix design for an outdoor pavement exposed to freezing and thawing, requiring air entrainment, a slump of 25-50 mm, and a maximum aggregate size of 25 mm.

Problem

FAQ

What standard does this concrete mix design calculator follow?

It follows the ACI 211.1-91 standard using the absolute-volume method for normal-weight concrete.

What is the typical range for the water-cement (w/c) ratio?

The typical range is between 0.35 and 0.65, depending on the target strength and exposure conditions.

How is the volume of coarse aggregate determined?

It is determined based on the nominal maximum size of the aggregate and the fineness modulus of the sand using standard ACI 211.1 table values.

Does this tool account for aggregate moisture corrections?

No, this tool calculates the mix design based on dry aggregate weights as per standard ACI absolute-volume calculations.

What is the fineness modulus of sand?

It is an index representing the average size of the fine aggregate particles, typically ranging from 2.40 to 3.00 for concrete mixes.

Hub

Preliminary Concrete Mix and Reinforcement Layout Workflow

Prepare a preliminary concrete mix per cubic metre and a separate reinforcement spacing or bar-count check. Keep units, material assumptions, cover and spacing constraints, constructability, and local code review visible. Calculator results are not a stamped structural design or site safety approval.

Home
Tools3212
Samples593
Visualizations471
Viewers103
Hubs239
Tags333
Images, Audio & Video657

Image, audio, and video processing, conversion, and optimization tools

Math, Date & Finance647

Calculators, numerics, date logic, statistics, and finance tools

Design & Color298

Color, layout, graphics, visual styling, and design helper tools

Text & Writing209

Writing, cleanup, formatting, extraction, and text analysis tools

Developer & Web193

Developer utilities, networking, web debugging, and automation helpers

Conversion & Encoding175

Format, file, archive, unit, and encoding conversion tools

Lead Generation Quiz Launch and Contact Handoff
Memorial Drafts: Family Review and Print Handoff
Private Habit Records: Backup, Restore and Sharing Review
Article to X and LinkedIn Drafts: Fact Review and Handoff
Markdown Interactive Deck Review and Offline Handoff

© 2026 Elysia Tools. All rights reserved.

DocsPricingAboutTerms of ServicePrivacy PolicyCookiesContact
UI Component Libraries

Ant Design Samples

Ant Design component examples - Enterprise-class UI design language and React UI library with rich set of high-quality components

Java

Android Image Processing Java Samples

Android Java image processing examples including reading/saving images, scaling, and format conversion

Kotlin

Android Image Processing Kotlin Samples

Android Kotlin image processing examples including reading/saving images, scaling, and format conversion

Python

Web Image Processing Python Samples

Web Python image processing examples using PIL/Pillow including reading, saving, resizing, and format conversion

Math & Numbers

Active Earth Pressure (Rankine)

Calculate the Rankine active earth pressure on a smooth vertical wall backfilled with cohesionless soil. K_a = tan²(45°−φ/2). Optional uniform surcharge q. Returns the base pressure p₀, the total force P, and the resultant height.

Math & Numbers

Bearing Capacity Calculator (Terzaghi)

Calculate the Terzaghi ultimate bearing capacity of a shallow foundation: q_ult = c·Nc·sc + q·Nq·sq + 0.5·γ·B·Nγ·sγ. Computes Nc/Nq/Nγ and shape factors automatically; supports strip, square, and circular footings. Result in kPa.

Math & Numbers

Belt Pulley Speed Ratio Calculator

Calculate the ratio, driven speed and belt linear speed of a belt drive. i = d₂/d₁ = n₁/n₂, belt speed v = π·d·n/60. Supports mm/cm/m/inch diameter units.

Math & Numbers

Bending Stress Calculator

Calculate the maximum bending (flexural) stress σ_max = M·c/I = M/Z at the outermost fiber of a beam section. Supports solid circle, rectangle, hollow tube, and I-beam; computes I, section modulus Z, and distance c automatically. Stress in MPa.

Determine the batch weights per cubic meter with a w/c ratio of 0.50 and a sand fineness modulus of 2.60.

How to use

Select a slump of 25-50 mm, maximum aggregate size of 25 mm, and entrained air. Set the w/c ratio to 0.50, fineness modulus to 2.60, and coarse aggregate density to 1600 kg/m³.

slump: 25-50, maxSize: 25, air: entrained, wcRatio: 0.5, finenessModulus: 2.6, caDensity: 1600

Outcome

The tool calculates the required weights per cubic meter: 320 kg of cement, 160 kg of water, 1104 kg of coarse aggregate, and 733.54 kg of sand, yielding a mass ratio of 1 : 0.50 : 2.29 : 3.45.