Elysia Tools

Browse tools, examples, visual explainers, and topic guides from one clear workspace.

Top Categories

Hubs

Language
ZHDERUPTENFRES

Elysia Tools

Navigation

Media

Ground Loop Diagnoser

· Last updated:2026-10-13

Diagnose electrical hum contamination in recordings: 50/60 Hz mains family with harmonic profile, ground-loop vs PSU-buzz classification, and a recommended repair chain.

Details

What this tool helps you do

Electrical hum is one of the most common contaminants in location and studio recordings, and it has a fingerprint. This tool decodes your audio and probes the mains frequency families the way an engineer reads the spectrum: exact-frequency Goertzel probes at 50 Hz and 60 Hz plus harmonics up to the 8th, each measured as prominence above the local spectral floor (the neighboring bins), so a big low-frequency musical note does not masquerade as hum. With mains set to auto, the stronger harmonic FAMILY wins - a recording whose energy sits at 100/200/300 Hz belongs to the 50 Hz family, one at 120/240/360 Hz to 60 Hz. The harmonic shape drives the diagnosis the classic way: a strong fundamental with smoothly decaying, odd-dominant harmonics is ground-loop / transformer hum (steady, sitting there with volume down, changing when you touch gear or unplug one cable); a buzz where the rectifier family - the 2nd/4th harmonics, 100/120 Hz and up - dominates over the fundamental points at power-supply and rectifier noise; weak prominence is mild hum; none is clean. The report also measures steadiness (hum level variance across 2-second blocks - ground loops are famously steady), reports both channels separately with their correlation (common-mode hum hits both channels nearly identically, a telltale of electrical rather than acoustic pickup), and renders the harmonic profile as a bar chart plus a hum-presence timeline. Finally it hands you a repair kit: an FFmpeg chain with band-reject notches tuned to the exact harmonics found (copy it into your own processing or the noise profile extractor workflow), and the physical checklist audio engineers actually use - star-ground all gear to one outlet, separate audio from power runs, lift the shield at one end of balanced runs or use a DI/isolation transformer, and suspect dimmers and switch-mode supplies when the buzz family dominates. Diagnosis is measurement; the fix for a true ground loop is electrical.

Execution

Run this tool

Fill in the form, run the tool, and review the result in one place.

Samples

Examples that match this tool

Related

Continue with connected tools and hubs

Written by the Elysia Tools team

Tool usage guide

Learn when to use this tool, what it supports, and how real users apply it.

Key facts

Category
Media
Input types
file, select
Output type
html
Sample coverage
4
API ready
Yes

Overview

Ground Loop Diagnoser analyzes audio recordings to detect and classify electrical hum, distinguishing between genuine ground-loop interference and power supply rectifier buzz. Using exact-frequency Goertzel spectral probes at 50 Hz, 60 Hz, and their harmonics up to the 8th order, it calculates prominence against the local noise floor, evaluates channel correlation, and outputs a tailored FFmpeg notch filter repair chain.

When to use

  • Location or studio audio contains an audible, steady low-frequency hum or buzzing sound.
  • You need to verify whether electrical interference stems from a 50 Hz or 60 Hz mains power system.
  • You want to determine if the culprit is a ground loop or a switch-mode power supply before applying corrective EQ or physical troubleshooting.

How it works

  1. 1Upload any audio recording up to 100 MB and select auto-detection or force a 50 Hz or 60 Hz mains base frequency.
  2. 2The tool applies targeted Goertzel filters across fundamental and harmonic bins to measure peak prominence above the local noise floor without mistaking musical bass notes for electrical noise.
  3. 3Harmonic decay, odd-versus-even dominance, 2-second block variance, and inter-channel correlation are calculated to classify the issue as ground-loop hum, PSU buzz, mild hum, or clean audio.
  4. 4An interactive HTML report is generated containing a harmonic bar chart, presence timeline, physical checklist recommendations, and an exact-tuned FFmpeg band-reject notch filter command.

Use cases

  • Diagnosing persistent AC hum in location film dialogue tracks recorded near stage lighting or generators.
  • Evaluating studio multitrack recordings to pinpoint whether audio interfaces or outboard gear suffer from ground loops or faulty power bricks.
  • Extracting surgically targeted notch filter frequencies for automated audio restoration pipelines.

Examples

1. Diagnosing European Location Dialogue Hum

Re-recording Mixer

Background

An outdoor interview captured in Europe contains a consistent low-end drone underneath the speaker's voice.

Problem

Determine if the contamination is 50 Hz utility hum and generate filter parameters without destroying the male voice's fundamental warmth.

How to use

Upload the dialogue WAV file with mains detection set to Auto.

Audio file: dialogue_take1.wav, Mains frequency: auto

Outcome

Identified as 50 Hz ground-loop hum with prominent 150 Hz and 250 Hz odd harmonics, delivering an FFmpeg filter chain with precise band-reject notches at those three points.

2. Identifying Power Supply Rectifier Buzz in a Guitar DI

Studio Recording Engineer

Background

A direct-injected bass track recorded in North America has a harsh, buzzy edge that persists when the instrument volume is rolled down.

Problem

Confirm whether the buzz is caused by a ground loop or a noisy switch-mode power adapter powering the pedalboard.

How to use

FAQ

How does the tool distinguish between ground loop hum and PSU buzz?

Ground loop hum exhibits a strong fundamental frequency with smoothly decaying odd harmonics, whereas power supply buzz shows dominant even harmonics from full-wave rectification.

Can low musical bass notes trigger a false positive?

No, each probe measures spectral prominence relative to immediate neighboring bins, preventing broad musical bass tones from registering as narrow electrical spikes.

What does inter-channel correlation indicate in the report?

High correlation indicates common-mode electrical noise entering both channels identically, confirming wiring or ground issues rather than acoustic background noise.

How do I apply the suggested repair chain?

Copy the generated FFmpeg command containing tailored band-reject notch filters into your terminal or post-production workflow to surgically attenuate the detected frequencies.

Which audio formats and file sizes are supported?

Standard audio file formats are accepted with a maximum upload file size of 100 MB.

Home
Tools3212
Samples593
Visualizations471
Viewers103
Hubs239
Tags333
Images, Audio & Video657

Image, audio, and video processing, conversion, and optimization tools

Math, Date & Finance647

Calculators, numerics, date logic, statistics, and finance tools

Design & Color298

Color, layout, graphics, visual styling, and design helper tools

Text & Writing209

Writing, cleanup, formatting, extraction, and text analysis tools

Developer & Web193

Developer utilities, networking, web debugging, and automation helpers

Conversion & Encoding175

Format, file, archive, unit, and encoding conversion tools

Lead Generation Quiz Launch and Contact Handoff
Memorial Drafts: Family Review and Print Handoff
Private Habit Records: Backup, Restore and Sharing Review
Article to X and LinkedIn Drafts: Fact Review and Handoff
Markdown Interactive Deck Review and Offline Handoff

© 2026 Elysia Tools. All rights reserved.

DocsPricingAboutTerms of ServicePrivacy PolicyCookiesContact
Game Development

Bevy Game Engine Samples

Bevy Rust game engine examples with ECS, 2D/3D graphics, audio, and game mechanics implementations

Game Development

Godot Engine Samples

Godot Engine examples including 2D/3D games, GDScript, C#, and engine features

Media

Copyright-Free FLAC Audio Samples

Lossless FLAC audio samples for testing and development, mirrored from MP3 set with nature sounds and meditation music

Media

Copyright-Free MP3 Audio Samples

Collection of royalty-free audio samples for testing and development purposes including nature sounds, meditation music, and ambient audio

Media

Audio Band-Reject Filter

Remove a specific band of frequencies

Media

Classroom Recording Cleaner

Clean lecture recordings with speech-focused EQ, hum reduction, peak control, and optional long-silence trimming.

Media

Audio Mouth Click Finder

Detect-style repair for lip smacks, saliva clicks, mouth ticks, and small voice-over clicks.

Media

Audio Notch Filter

Remove a very narrow frequency band (e.g., hum)

Upload the bass track and set mains frequency to 60 Hz region.

Audio file: bass_di.wav, Mains frequency: 60

Outcome

Classified as psu-buzz due to dominant 120 Hz and 240 Hz even harmonics, accompanied by recommendations to check pedalboard power supplies and dimmers.