Elysia Tools

Browse tools, examples, visual explainers, and topic guides from one clear workspace.

Top Categories

Hubs

Language
ZHDERUPTENFRES

Elysia Tools

Navigation

Media

MIDI 1.0 / MIDI 2.0 UMP Universal MIDI Packet, Channel Voice 2.0, SysEx 7/8-bit Wire-Protocol Decoder & Byte Counter

· Last updated:2026-09-16

Decode a MIDI 1.0 bytestream (status bytes, running status, System Common / Real Time, System Exclusive) or a MIDI 2.0 Universal MIDI Packet stream — message types 0x0 Utility, 0x1 System, 0x2 MIDI 1.0 Channel Voice, 0x3 SysEx 7-bit, 0x4 MIDI 2.0 Channel Voice with 16-bit velocity and the 7.9 pitch attribute, 0x5 SysEx 8-bit / Mixed Data, 0xD Flex Data, 0xF UMP Stream — with per-packet field tables, byte/word/packet counts, reserved-field validation, SysEx continuation state machines, and MIDI 1.0 ⇄ UMP translation.

Details

What this tool helps you do

UMP packets are fixed-length per message type (0x0/0x1/0x2: one 32-bit word; 0x3/0x4: two; 0x5/0xD/0xF: four; 0x6-0xE unassigned in UMP 1.1) with the type in the top nibble of byte 0. The MIDI 2.0 Channel Voice status table decodes 0x0/0x1 registered/assignable per-note controllers, 0x2/0x3 RPN/NRPN, 0x4/0x5 relative RPN/NRPN, 0x6 per-note pitch bend (32-bit), 0x8/0x9 Note Off/On (16-bit velocity + attribute type 1 = Pitch 7.9: 7-bit semitone + 9-bit fraction, 512 steps per semitone), 0xA poly pressure, 0xB control change, 0xC program change with bank-valid bit, 0xD channel pressure, 0xE channel pitch bend (32-bit, centre 0x80000000) and 0xF per-note management. SysEx7 packets are always 2 words carrying up to 6 data bytes; SysEx8 packets are always 4 words carrying a stream id plus up to 13 eight-bit-clean bytes. The MIDI 1.0 decoder honours the original specification: running status applies only to channel messages, System Real Time bytes may be interleaved anywhere without cancelling it, and System Common / SysEx cancel it. Field layouts are cross-checked against the Linux kernel, JUCE and cmidi2 implementations of the adopted UMP 1.1.2 specification.

Execution

Run this tool

Fill in the form, run the tool, and review the result in one place.

Samples

Examples that match this tool

Related

Continue with connected tools and hubs

Written by the Elysia Tools team

Tool usage guide

Learn when to use this tool, what it supports, and how real users apply it.

Key facts

Category
Media
Input types
textarea, select, checkbox, number
Output type
html
Sample coverage
4
API ready
Yes

Overview

The MIDI 1.0 / MIDI 2.0 UMP Decoder inspects, validates, and parses raw hex byte streams into structured message tables. It supports legacy MIDI 1.0 bytestreams with running status and interleaved real-time bytes, as well as 32-bit Universal MIDI Packet (UMP) formats spanning MIDI 2.0 Channel Voice, 7-bit SysEx, 8-bit SysEx, Flex Data, and Stream messages, complete with byte, word, and packet counts.

When to use

  • Debugging raw hex packet dumps from USB MIDI 2.0 interfaces, virtual MIDI drivers, or hardware synth capture logs.
  • Verifying MIDI 2.0 Channel Voice messages, including 16-bit high-resolution velocity, 32-bit controllers, and Pitch 7.9 note attributes.
  • Analyzing legacy MIDI 1.0 bytestreams with running status and testing conversion to 32-bit Universal MIDI Packets across assigned groups.

How it works

  1. 1Paste raw hexadecimal bytes into the input field using spaces, commas, newlines, or 0x prefixes.
  2. 2Select the protocol format—MIDI 2.0 UMP stream (32-bit packet words) or standard MIDI 1.0 bytestream.
  3. 3Optionally enable MIDI 1.0 to UMP translation and configure the target UMP group number (0–15).
  4. 4Inspect the decoded message breakdowns, packet metrics, field values, and SysEx state machine logs.

Use cases

  • Firmware engineers validating embedded USB MIDI 2.0 driver packet structures against the adopted UMP 1.1.2 specification.
  • Audio software developers verifying MIDI 1.0 to MIDI 2.0 translation accuracy and running status expansion in plugin hosts.
  • Hardware developers troubleshooting multi-packet 7-bit and 8-bit System Exclusive transfers and continuation state flags.

Examples

1. Decoding MIDI 2.0 UMP Channel Voice and SysEx Stream

Audio Software Developer

Background

Testing a MIDI 2.0 synthesizer plugin receiving UMP packet streams containing high-resolution notes and SysEx8 payloads.

Problem

Need to confirm that pitch attributes, 16-bit velocities, and 8-bit SysEx packets decode with correct bit alignment and zero errors.

How to use

Select 'MIDI 2.0 UMP stream' protocol and paste the packet hex stream into the input area.

hexInput = 40 90 3C 01 D2 00 0B 00 41 C1 01 00 0A 00 00 00 20 B0 07 64 30 04 7E 7F 09 01 00 00 10 F8 00 00 00 10 12 34 50 03 03 90 FF 00 00 00 00 00 00 00 00 00 00 00, protocol = ump

Outcome

Decodes 7 packets (13 words, 52 bytes) detailing a Note On with Pitch 7.9 attribute, bank-valid Program Change, SysEx7, Timing Clock, JR Clock, and SysEx8 Complete.

2. Validating MIDI 1.0 Running Status and SysEx

Hardware Firmware Engineer

Background

Capturing serial UART byte streams from a legacy hardware MIDI controller to debug intermittent note truncation.

Problem

Verify whether interleaved timing clock bytes correctly preserve running status across multiple note events.

FAQ

What UMP message types are supported by the decoder?

It decodes Utility (0x0), System (0x1), MIDI 1.0 Channel Voice (0x2), SysEx 7-bit (0x3), MIDI 2.0 Channel Voice (0x4), SysEx 8-bit / Mixed Data (0x5), Flex Data (0xD), and UMP Stream (0xF) packets.

How does the tool handle running status in MIDI 1.0 bytestreams?

It applies running status to channel messages, maintains status across interleaved Real Time bytes (like 0xF8 Timing Clock), and resets it on System Common or SysEx bytes according to spec.

What is the Pitch 7.9 attribute decoded in MIDI 2.0 Note On/Off messages?

Pitch 7.9 specifies microtonal tuning per note using a 7-bit semitone base value combined with a 9-bit fractional tuning fraction (512 steps per semitone).

What is the difference between SysEx7 and SysEx8 packets in UMP?

SysEx7 packets are fixed at 2 words (64 bits) carrying up to 6 7-bit bytes, while SysEx8 packets use 4 words (128 bits) with a stream ID and up to 13 raw 8-bit clean bytes.

Can this tool convert legacy MIDI 1.0 byte sequences to UMP words?

Yes. Enabling the translation option converts MIDI 1.0 channel and system messages into corresponding 32-bit UMP packets routed to your designated group (0–15).

Home
Tools3212
Samples593
Visualizations471
Viewers103
Hubs239
Tags333
Images, Audio & Video657

Image, audio, and video processing, conversion, and optimization tools

Math, Date & Finance647

Calculators, numerics, date logic, statistics, and finance tools

Design & Color298

Color, layout, graphics, visual styling, and design helper tools

Text & Writing209

Writing, cleanup, formatting, extraction, and text analysis tools

Developer & Web193

Developer utilities, networking, web debugging, and automation helpers

Conversion & Encoding175

Format, file, archive, unit, and encoding conversion tools

Lead Generation Quiz Launch and Contact Handoff
Memorial Drafts: Family Review and Print Handoff
Private Habit Records: Backup, Restore and Sharing Review
Article to X and LinkedIn Drafts: Fact Review and Handoff
Markdown Interactive Deck Review and Offline Handoff

© 2026 Elysia Tools. All rights reserved.

DocsPricingAboutTerms of ServicePrivacy PolicyCookiesContact
Network Protocols

QUIC Protocol Implementation Samples

Comprehensive QUIC protocol samples covering HTTP/3 implementation, UDP reliable transport, connection migration, and performance optimization

Communication Protocols

AMQP Message Protocol

AMQP (Advanced Message Queuing Protocol) examples for enterprise messaging with RabbitMQ, queues, exchanges, and advanced routing patterns

Media

MIDI Viewer Samples

Sample MIDI file for the in-browser MIDI Viewer

Communication Protocols

MQTT Message Protocol

MQTT (Message Queuing Telemetry Transport) protocol examples for IoT and real-time messaging with publish/subscribe patterns

Media

DTMF Decoder

Detect DTMF touch-tone digits in any recording and recover the keypad sequence with timestamps. Goertzel filter bank per ITU-T Q.23/Q.24 — measures both tone frequencies, twist and duration for every keypress.

Media

Lossy Codec Preview Compare

Hear and measure what streaming does to your master: encode to MP3, AAC or Opus at real streaming bitrates, decode back, and compare loudness shift, true-peak overshoot and headroom against the original — the Apple Digital Masters round-trip audition as a report plus downloadable preview files.

Media

DSD to PCM Converter

Convert DSD (Direct Stream Digital) audio files to PCM WAV format with selectable bit depth and sample rate

Media

HDR AVIF to SDR PNG Tone Mapper

Decode PQ or HLG AVIF, convert BT.2020 to sRGB, and tone map highlights into a viewable SDR PNG.

How to use

Select 'MIDI 1.0 bytestream' protocol, paste the captured byte stream, and inspect the message list and expansion metrics.

hexInput = 90 3C 40 40 40 43 40 B0 07 64 F8 E0 00 40 C0 05 F0 7E 7F 09 01 F7 FF, protocol = midi10

Outcome

Confirms 24 raw bytes unpack into 9 messages, maintaining running status through the 0xF8 Timing Clock byte and tracking the 19-byte expanded representation.